complexType "reg:polygonType"
Namespace:
http://www.ivoa.net/xml/STC/STCregion/v1.20
Content:
complex, 3 attributes, 1 element
Defined:
globally in region-v1.20.xsd; see XML source
Includes:
definition of 1 element
Used:
never
XML Representation Summary
<...
    fill_factor
 = 
 xs:double : "1.0"
    note
 = 
 xs:string
    unit
 = 
 ("deg" | "deg deg m" | "rad" | "h" | "arcmin" | "arcsec" | "m" | "km" | "mm" | "AU" | "pc" | "kpc" | "Mpc" | "lyr" | "") : "deg"
    >
   
Content: 
 reg:Vertex+
</...>
Content Model Elements (1):
reg:Vertex (type reg:vertexType)
Annotation
Polygon: one or more vertices; counter-clockwise encircled area is enclosed; sides should span less than 180 deg in each coordinate if spherical
Type Definition Detail
Type Derivation Tree
reg:regionType (extension)
  reg:shapeType (extension)
      reg:polygonType
XML Source (see within schema source)
<xs:complexType name="polygonType">
<xs:annotation>
<xs:documentation>
Polygon: one or more vertices; counter-clockwise encircled area is enclosed; sides should span less than 180 deg in each coordinate if spherical
</xs:documentation>
</xs:annotation>
<xs:complexContent>
<xs:extension base="reg:shapeType">
<xs:sequence>
<xs:element maxOccurs="unbounded" name="Vertex" type="reg:vertexType">
<xs:annotation>
<xs:documentation>
In order to form polygons, vertices are to be connected with straight line segments. In the case of spherical coordinates: greatcircle segments; if a smallCircle element si present, the vertex and its predecessor are to be connected with a smallcircle, by default in the CoordSys that is referenced; optionally, a pole may be specified (other than the CoordSys pole) that defines the smallcircle system
</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
Attribute Detail (all declarations; 3)
fill_factor
Type:
anonymous (restriction of xs:double)
Use:
optional
Default:
"1.0"
Defined:
locally within reg:regionType complexType
The fill_factor (value between 0 and 1) indicates the fraction of the region that is actually included; possible application: large scale resource coverage areas
Anonymous simpleType
Derivation:
restriction of xs:double
XML Source (see within schema source)
<xs:attribute default="1.0" name="fill_factor" use="optional">
<xs:annotation>
<xs:documentation>
The fill_factor (value between 0 and 1) indicates the fraction of the region that is actually included; possible application: large scale resource coverage areas
</xs:documentation>
</xs:annotation>
<xs:simpleType>
<xs:restriction base="xs:double">
<xs:minInclusive value="0.0"/>
<xs:maxInclusive value="1.0"/>
</xs:restriction>
</xs:simpleType>
</xs:attribute>
note
Type:
xs:string
Use:
optional
Defined:
locally within reg:regionType complexType
XML Source (see within schema source)
<xs:attribute name="note" type="xs:string" use="optional"/>
unit
Type:
crd:posUnitType
Use:
optional
Default:
"deg"
Defined:
locally within reg:shapeType complexType
XML Source (see within schema source)
<xs:attribute default="deg" name="unit" type="crd:posUnitType" use="optional"/>
Content Element Detail (all declarations; 1)
reg:Vertex
Type:
reg:vertexType, complex content
Defined:
locally within (this) reg:polygonType complexType
In order to form polygons, vertices are to be connected with straight line segments. In the case of spherical coordinates: greatcircle segments; if a smallCircle element si present, the vertex and its predecessor are to be connected with a smallcircle, by default in the CoordSys that is referenced; optionally, a pole may be specified (other than the CoordSys pole) that defines the smallcircle system
XML Source (see within schema source)
<xs:element maxOccurs="unbounded" name="Vertex" type="reg:vertexType">
<xs:annotation>
<xs:documentation>
In order to form polygons, vertices are to be connected with straight line segments. In the case of spherical coordinates: greatcircle segments; if a smallCircle element si present, the vertex and its predecessor are to be connected with a smallcircle, by default in the CoordSys that is referenced; optionally, a pole may be specified (other than the CoordSys pole) that defines the smallcircle system
</xs:documentation>
</xs:annotation>
</xs:element>
This XML schema documentation has been generated with DocFlex/XML RE 1.8.0 using DocFlex/XML XSDDoc 2.2.0 template set.
DocFlex/XML RE is a reduced edition of DocFlex/XML, which is a tool for programming and running highly sophisticated documentation and reports generators by the data obtained from any kind of XML files. The actual doc-generators are implemented in the form of special templates that are designed visually using a high quality Template Designer GUI basing on the XML schema (or DTD) files describing the data source XML.
DocFlex/XML XSDDoc is a commercial template application of DocFlex/XML that implements a high-end XML Schema documentation generator with simultaneous support of framed multi-file HTML, single-file HTML and RTF output formats. (More formats are planned in the future).
A commercial license for "DocFlex/XML XSDDoc" will allow you:
  • To configure the generated documentation so much as you want. Thanks to our template technology, it was possible to support more than 300 template parameters (working the same as "options" of an ordinary doc-gen), which will give you an unprecedented control over the generated content!
  • To use certain features disabled in the free mode (such as the full documenting of substitution groups).
  • To enable/disable documenting of the initial, imported, included and redefined XML schemas selectively.
  • To document local element components both globally and locally (similar to attributes).
  • To enable/disable reproducing of namespace prefixes.
  • To format your annotations with XHTML tags and reproduce that formatting both in HTML and RTF output.
  • To insert images in your annotations using XHTML <img> tags (supported both in HTML and RTF output).
  • To use PlainDoc.tpl main template to generate all the XML schema documentation in the form of a single HTML file.
  • To use the same template to generate the incredible quality RTF documentation.
  • To document only selected XML schema components specified by name.
  • To remove this very advertisement text
Once having only such a license, you will be able to run the fully-featured XML schema documentation generator both with DocFlex/XML SDK and with DocFlex/XML RE, which is a reduced free edition containing only the template interpretor / output generator. No other licenses will be required!
But this is not all. In addition to it, a commercial license for DocFlex/XML SDK will allow you to modify the XSDDoc templates themselves as much as you want. You will be able to achieve whatever was impossible to do with the template parameters only. And, of course, you could develop any template applications by your own!
Please note: By purchasing a license for this software, you not only acquire a useful tool, you will also make an important investment in its future development, the result of which you could enjoy later by yourself. Every single your purchase matters and makes a difference for us!
To buy a license, please follow this link: http://www.filigris.com/shop/